Welch Allyn VSM 6000 series Directions For Use Manual page 66

60 Patient monitoring
Buttons
The buttons on the right side of the frame enable you to do different tasks depending on the profile
you are using. The availability of functions depends on which profile is selected. See the Profiles
section for more information.
Button name Button image
Start/Stop
Interval
Alarm Limit control This button displays alarm limits and status.
The appearance and function of this button dynamically changes.
This button shows the status of automatic measurements.
Touch the button to display the Intervals tab, where you can configure automatic
measurements.
Welch Allyn Vital Signs Monitor 6000 Series™
Description
Touch to start a manual measurement or a cycle
of automatic measurements.
Touch to stop a measurement that is in progress.
Automatic measurements are off.
Automatic measurements are on.
Touch the button to display the Alarms tab.