Welch Allyn VSM 6000 series Directions For Use Manual page 50

44 Using the keypad, keyboard, and barcode scanner
Note
Note
Note
Scanning a patient's barcode while on the Home tab will place the scanned ID into
the Patient frame. Scanning a patient's barcode while the Patients List tab is open
requires the following additional steps:
• Touch Add to add a new patient
• Touch the keyboard in the Patient ID field
• Scan the patient's barcode
• Confirm the patient information by touching OK
Scanning a clinician ID while the Clinician ID pane is open will place the scanned ID
into the Clinician ID section of the Device Status area. Touch Select to return to the
Home tab and to begin taking patient measurements.
Use the Advanced settings Data Management tab to change the appearance of the
Clinician ID if you do not want your ID to appear in the Device Status area. (This
requires the Advanced settings access code.) However, this information is still
retained in the monitor memory for recall, printing, or to send measurements
electronically to the network.
Welch Allyn Vital Signs Monitor 6000 Series™