Welch Allyn VSM 6000 series Directions For Use Manual page 116

110 Advanced settings
•
Specify date and time settings
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. On the General tab, touch the Date / Time tab.
3. Specify settings.
Setting
Date format
Time zone
Automatically adjust clock for daylight saving time,
reported by host
Allow users to change date and time
Display date and time
4. Do one of the following:
•
•
Specify advanced alarm settings
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the Alarms tab.
3. Specify settings.
Setting
Allow user to disable alarms
Allow user to turn off general audio
To exit the Advanced Settings and return to the Home tab, touch Exit.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
To continue in the Advanced Settings, touch another tab.
To exit the Advanced Settings and return to the Home tab, touch Exit.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
Welch Allyn Vital Signs Monitor 6000 Series™
Action/Description
Select a date format for display.
Select your time zone offset from Coordinated
Universal Time (UTC).
Select this to adjust the displayed time by +/- one
hour when the connected host reports daylight
savings time.
Select this to allow clinicians to set the date and
time from the Settings tab.
Select this to display the date and time on the
Home tab in the Device Status area.
Action/Description
Select to allow clinicians to turn off or turn on all
alarm limits for each vital sign. The control is on
each parameter-specific tab on the Alarms tab.
Select to allow clinicians to turn off all audio
notification for alarms. This control is on the Alarms
tab (on the General tab).