Welch Allyn VSM 6000 series Directions For Use Manual page 123

Directions for use
Secondary label
Require patient ID to save readings
Search by patient ID
5. Do one of the following:
•
•
Specify clinician ID settings
Clinician identification appears next to the medicine symbol in the Device Status area on the Home
tab.
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the Data Management tab.
3. Touch the Clinician IDs tab.
4. Specify settings.
Setting
Label
Require clinician ID to save readings
5. Do one of the following:
•
•
Specify clinical data settings
1. Access the Advanced Settings.
To continue in the Advanced Settings, touch another tab.
To exit the Advanced Settings and return to the Home tab, touch Exit.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
To continue in the Advanced Settings, touch another tab.
To exit the Advanced Settings and return to the Home tab, touch Exit.
Advanced settings 117
Select a secondary identification label for patients.
A secondary label displays only on the Home tab,
after the primary label.
Select this option to make entering a patient ID a
prerequisite for saving measurements. If they fail to
enter an identifier, the monitor prompts them when
they try to save.
Select this option to enable clinicians to enter a
patient ID to query for the patient's information. If
clinicians scan the ID onto the Home tab, the
monitor queries the patient list and the network. If
clinicians enter the ID on the Summary tab, the
monitor queries the patient list. In both cases,
returned patient information populates the Patient
frame on the Home tab and fields on the Summary
tab.
Action/Description
Select a type of clinician identification label for
display on the Home tab: Full name,
Abbreviation, Clinician ID, or Symbol only
Select this option to make entering a clinician ID a
prerequisite for saving measurements. If they fail to
enter identification, the monitor prompts them
when they try to save. Clinicians can enter clinician
identification on the Clinician tab.