Welch Allyn VSM 6000 series Directions For Use Manual page 118

112 Advanced settings
Specify a monitor location
You can associate the monitor with a specific location. The location appears in the Device Status
area.
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the Other tab.
3. In the Location ID box, touch
4. Do one of the following:
•
•
Enable monitor profile changes
You can allow clinicians to change the active profile on the monitor. Available profiles are
Monitor, Spot Check, and Triage. When this option is enabled, clinicians can change the
name of the profile as well.
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the Other tab.
3. Select Allow profile change.
4. Do one of the following:
•
•
Set and start the demo mode
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the General tab.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
To continue in the Advanced Settings, touch another tab.
To exit the Advanced Settings and return to the Home tab, touch Exit.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
To continue in the Advanced Settings, touch another tab.
To exit the Advanced Settings and return to the Home tab, touch Exit.
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
Welch Allyn Vital Signs Monitor 6000 Series™
and enter up to 20 alphanumeric characters.