Directions for use
Message
Printer too hot; wait to retry.
Printer not functional. Call for
service.
External device not recognized. An external printer is plugged into a USB
Printing records:
Note The number of records
requested appears in the
message and counts down
during printing.
Printing report; please wait.
Possible cause
The print head overheated
The printer motor is broken
The detection switch malfunctioned
A hardware failure occurred in the power
supply
The printer does not identify itself correctly
The printer cannot communicate with the
monitor
No printer; wrong printer
port
The monitor is printing the records selected
on the Review tab
The printer needs more time to complete a
Automatic print on
print job when the
interval
control has been enabled
Troubleshooting 127
Suggested action
Wait for the print head to cool
down and retry. If the problem
persists, call for service.
Call for service.
Unplug the external printer.
Acknowledge the number of
records printing or touch
Cancel
to interrupt printing.
Wait for the print job to print
completely.