Attaching The Avaya Video Micpod 1000 Strain Relief Clip - Avaya 1050 Installation Manual

Attaching the Avaya Video MicPod 1000 Strain Relief Clip

If the Avaya Video MicPod 1000 is installed in an area where the cord could be pulled or
tripped upon, Avaya recommends using the strain relief clip included with your Avaya Video
MicPod 1000 to reduce the chance of disconnecting or damaging the plug or the Avaya
video communications system codec.
Before attaching the strain relief clip to the codec, ensure that the codec surface is clean
(free of dirt, dust, oil, and other residues) and dry. The adhesive tape on the strain relief clip
is intended for a single use. Attach the strain relief clip to the codec and route the Avaya
Video MicPod 1000 cable through the strain relief clip as shown in the following diagram.
To obtain a replacement strain relief clip, contact your Avaya Partner.
Avaya 1050 Installation Guide 22