Charger Settings Menu - Xantrex Freedom SW 230V 815-3524-02 Owner's Manual

Charger Settings Menu

The Charger Settings menu provides options for configuring the
Freedom SW 230V to operate from your battery bank.
FSW3524 00: Chg Settings
Batt Type [Flooded]
Custom Settings
Batt Capacity [440Ah]
Max Chg Rate [100%]
Charge Cycle [3-Stage]
ReCharge Volts [25.0V]
Absorb Time [180min]
Auto Recharge [Enabled]
Default Batt Temp [Warm]
Figure 29 Charger Settings Menu Screen
975-0696-01-01
[*Flooded] [Gel] [AGM] [Custom]
[*3-Stage] [2StgNoFloat]
[*Enabled] [Disabled]
[*Warm] [Hot] [Cold]
Follow procedures on "To select and change a
configurable setting:" on page 38 to change the settings.
Configuring the Freedom SW using the SCP
Table 10 Setting Defaults and Ranges
Model Freedom SW 230V
Item Default
Batt Type Flooded Flooded, Gel,
Batt Capacity 440Ah 50Ah
Freedom SW 2524-230
Batt Capacity 440Ah
Freedom SW 3524-230
Max Chg Rate 100%
Charge Cycle 3Stage
ReCharge Volts 25.0V 22.0V
Absorb Time 180min 1min
Auto ReCharge Enabled
Default Batt Warm Hot, Warm, Cold
Temp
Min Max
AGM, Custom
2000Ah
10% 100%
3Stage,
2StgNoFloat
27.0V
480min
Enabled,
Disabled
51