Resetting The Freedom Sw 230V To Default Settings - Xantrex Freedom SW 230V 815-3524-02 Owner's Manual

Configuring the Freedom SW using the SCP
Resetting the Freedom SW 230V to
Default Settings
The Restore Defaults command returns the Freedom SW 230V
to factory default settings. After using the Restore Defaults
command, the Freedom SW 230V is no longer configured for the
power system.
To restore Freedom SW 230V default settings:
1. On the Advanced Setup menu, select Restore Defaults.
Warning W252 appears, asking to confirm the command.
2. To cancel the command, press Func. To continue with the
Restore Defaults command, press Enter.
IMPORTANT:
If a warning is already active in the system, selecting
Restore Defaults brings up the Warnings list, with warning W252 at the top.
Press Enter to view W252 and continue with the restore defaults process.
EQUIPMENT DAMAGE
Do not restore defaults while the Freedom SW 230V is operating. De-
energize the power system and disconnect the Freedom SW 230V AC
input before restoring defaults. Reconfigure the Freedom SW 230V before
reconnecting the AC input and re-energizing the power system.
Failure to follow these instructions can damage the unit and/or damage
other equipment.
62 Freedom SW 230V Owner's Guide