Setting The Time And Date; Using The Stby/On Fault Clear Button - Xantrex Freedom SW 230V 815-3524-02 Owner's Manual

Setting the Time and Date

Freedom SW 230V advanced features such as time-stamped events
(faults, warnings, and logged historical data) require that the system
be set to the correct time. The Xanbus SCP has an internal clock that
controls the time for all Xanbus-enabled devices in the system. You
can set the time, time format, and date on the Clock menu.
The Clock menu is accessible on the Select Device menu.
For more information, refer to the Xanbus SCP Owner's Guide.
975-0696-01-01
Operating the Freedom SW with the SCP

Using the STBY/ON Fault Clear Button

The STBY/ON Fault Clear button has two functions.
The STBY/ON Fault Clear is used to clear active faults on the
system if pressed momentarily. It also toggles all Xanbus-enabled
devices on the system between Operating and Power Save (Safe)
mode when held down for more than five seconds.
Figure 16 Xanbus SCP STBY/ON Fault Clear Button
STBY/ON Fault Clear
Button
27