Warning Types - Xantrex Freedom SW 230V 815-3524-02 Owner's Manual

Warning Types

There are two types of warnings: automatic and manual. When the
Freedom SW 230V detects a warning condition, it displays a
warning message on the SCP.
Table 3 describes how they differ in their behavior and in how you
can respond to them when they appear on the SCP.
Table 3 Warning Types and Behavior
Warning type Behavior
Automatic warning Clears automatically if the fault condition
that generated the message goes away. You
can also acknowledge automatic warnings
without waiting for them to clear
automatically.
Manual warning Requires you to acknowledge it before you
can proceed with configuring or operating
the Freedom SW 230V.
Manual warnings are usually in the form of
a Yes/No question that you may
acknowledge by pressing the Enter button
on the SCP for Yes and the Func button
for No.
Refer to the Xanbus System Control Panel
Owner's Guide for more information.
975-0696-01-01
To view a warning list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List.
3. Press Enter.
Troubleshooting
75