Reading The Freedom Sw 230V Device Setup Screen - Xantrex Freedom SW 230V 815-3524-02 Owner's Manual

Reading the Freedom SW 230V Device Setup Screen

The Freedom SW 230V Device Setup menu screen displays real-
time operational data (status information) specific to the Freedom
SW 230V. The Freedom SW 230V status changes according to the
states described in Table 4, "Device Setup Screen Operating States
(Modes)" on page 32.
The Freedom SW 230V Device Setup menu screen has two
segments. The first segment (lines 2 to 5) displays status
information and appears first in the screen's initial four lines. The
second segment (lines 6 to 15) contains selectable fields when the
Down arrow button is pressed (scrolling down the device setup
screen). These selectable fields are configurable, meaning their
values can be changed from within the setup screen or they bring up
another screen (another level of configuration). For information on
how to configure the Freedom SW inverter/charger, see
"Configuring the Freedom SW using the SCP" on page 33.
975-0696-01-01
Operating the Freedom SW with the SCP
To view the Freedom SW 230V Setup menu screen:
1. On the Select Device screen, press the down arrow button
until the FSW3524E 00
2. Then, press Enter to display the
FSW3524E 00: Setup screen which is the device setup menu
screen.
3. Press the Up and Down arrow buttons to view status
information fields and move between selectable fields.
1.Typical device ID for a single installed Freedom Inverter/Charger. The second unit
has a device name FSW3524E followed by 01.
1
is highlighted.
29