Table of Contents
Advertisement
Introduction
Xantrex BC3012, BC5012, BC1524 and BC2524 Battery
Charger Features
The BC Series provides the following standard features:
•
three full current rated, independently controlled outputs which enable it to
charge three different batteries or battery banks. Each bank can be of a different
battery type, stage of charging, and temperature compensation
•
one battery temperature sensor (BTS) is included. Optional BTSs may be
purchased for the other two outputs, to provide complete optimal battery
charging to each battery or bank
•
battery monitoring functions while in float mode or rest mode
•
correct charging voltage for your batteries when connected to almost any single
phase AC power outlet in the world
The BC Series provides the following protection features:
•
true "fuseless" reverse polarity protection to guard against continuous reverse
battery polarity without charger damage
•
AC over voltage protection shutdown
•
over temperature protection shutdown
•
electronic current limiting for protection against short circuit on the unit's
output
•
built-in protection against accidental connection to a higher battery voltage, up
to 24 VDC
•
battery temperature compensation to 0 °C (32 °F) (with BTS installed)
•
ignition protected rating, enabling installation in engine spaces
•
isolated design to reduce shock hazard
•
automatic charge resumption after AC power interruption
1–2
975-0188-01-01
Advertisement
Table of Contents
