Table of Contents
Advertisement
Changing Freedom SW 230V Advanced Settings
Advanced Settings menu The advanced settings option gives
you access to the full range of Freedom SW 230V settings,
including everything displayed on the basic menu. As a safeguard
against unintended advanced configuration, the Xanbus SCP
displays the basic settings by default. To view the advanced
settings, you must perform a special keypress (see "Selecting
Advanced Settings From the Device Setup Screen" on page 46).
NOTE:
This keypress enables the advanced settings for every device in the
system. After performing the keypress, Advanced Settings appears in the
list and Basic Settings disappears.
975-0696-01-01
Configuring the Freedom SW using the SCP
FIRE AND ELECTRICAL SHOCK HAZARD
The advanced settings are intended for qualified installation/service
personnel only. Before changing advanced settings, you must be familiar
with the settings and the system-wide impact of changing those settings.
Setting parameters incorrectly could damage connected equipment (such
as batteries) or could severely affect the performance of your system.
Incorrect charging configuration can lead to battery damage and risk of
fire.
Failure to follow these instructions can result in minor or moderate injury
45
Advertisement
Table of Contents
Troubleshooting
