Table of Contents
Advertisement
Setting the Device Name
The Dev Name setting allows you to customize the name of the
Freedom SW 230V as it is displayed on other screens and menus.
Changing the device name is not mandatory for stacking to be
successful. It simply allows a user to distinguish between multiple
inverter/chargers that are installed in the same system.
The characters available are:
•
A to Z
•
a to z
•
0 to 9
•
space
NOTE:
Increasing the number of characters in a device name may cause
other text on the same line to run off the edge of the screen. Device names
should be limited to 10 characters or less.
Some examples of names are: "Master", "Slave", "Main", and
"Secondary".
975-0696-01-01
Configuring the Freedom SW using the SCP
To customize the Freedom SW 230V name:
1.
On the device setup menu, select Advanced Settings.
If Basic Settings appears instead of Advanced Settings
on the device setup menu, display Advanced Settings by
pressing Enter + Up arrow + Down arrow at the same time.
2.
Select the Stacking menu.
3.
Select Dev Name.
4.
Press Enter.
The last letter of the Freedom SW 230V name is highlighted.
5.
Begin customizing the device name.
•
To change the character, press the up or down arrow
button. Holding down the button causes the characters to
scroll more quickly.
•
To delete the character, press Func.
To add characters, press Enter.
•
6.
When the correct character is shown, press Enter to select it.
7.
After pressing Enter to select the last character of your
customized device name, press Enter again to return to the
menu.
59
Advertisement
Table of Contents
Troubleshooting
