Table of Contents
Advertisement
Configuring the Freedom SW using the SCP
Changing Freedom SW 230V Basic Settings
Basic Settings menu The Freedom SW 230V configuration
settings can be viewed in basic format (see "Selecting Basic
Settings From the Device Setup Screen" on page 42). The basic
settings include configuration items you may have to adjust
routinely, or as part of initial setup. It provides access to basic
control of the inverter/charger.
To select the Basic Settings menu screen:
1. On the FSW3524E 00:Setup screen (Figure 23), press the
down arrow button until Basic Settings is highlighted.
FSW3524E 00: Setup
Desired Mode
[Standby]
Clear Faults Warnings
View Device Info
Basic Settings
Figure 23 Selecting Basic Settings From the Device Setup Screen
2. Then, press Enter to display the
FSW3524E 00: Basic screen which is the basic settings menu
screen.
3.
Press the Up and Down arrow buttons to move between
selectable fields.
42
The Freedom SW 230V basic settings include menus for
configuring:
•
Battery type
•
Battery capacity
•
Maximum charging rate
•
Charging cycle
•
Recharging volts
•
AC Input breaker rating
•
Low battery cutout value
See Table 7, "Basic Settings" on page 44 for information on each
setting.
Freedom SW 230V Owner's Guide
Advertisement
Table of Contents
Troubleshooting
