Trovis 6482 Configuration And Parameterization Program - Samson Trovis 6400 Mounting And Operating Instructions

7.TROVIS 6482 Configuration and Parameterization Program

The TROVIS 6482 Configuration and Parameterization software program is a user-friendly MS
Windows application. In addition to entering configuration and parameter data, this program
also contains functions for documenting the process control station. These functions are, for
example editing of plant texts, printing of configuration and parameter data, storage of
different parameter and configuration data, and graphical display of analog inputs and
outputs, as well as binary status displays.
The TROVIS 6482 Configuration and Parameterization program runs under Windows 3.1 or
higher. The user is required to have previous knowledge of other Windows programs, which
should enable him to easily operate TROVIS 6482.
TROVIS 6482 comes together with a special COPA adapter (configuration and parameteriza-
tion adapter, order no. 1170-1141). This adapter enables the user to couple the process control
station with a PC via the front-panel serial interface. One side of the COPA adapter is a
connector, designed for connecting it to the front-panel of the process control station, whereas
the other side is a 9 pin D sub socket which connects to the Com1 or Com2 interface of the PC.
56