For values up to +/- 199.9, one place behind the decimal is supported; from 200.0 onwards, the decimal remains 0
3)
Values from -19.99 to +19.99 (-1999...+1999) are supported
5)
Is reset with Coil 66
6)
Can only be written to when no analog input is assigned
7)
For all configuration blocks and parameters applies: Not all values can be adjusted. For details, see Configuration manual KH 6412 E
8)
Input of zero is not permitted
9)
Software version 1.3 or higher
10)
Data is written to the non-volatile memory (EEPROM) of the process control station. The lifetime of this type of memory is limited to approx. 100000 write cycles,
meaning automatic, permanent writing to it is not permitted.