Samson Trovis 6400 Mounting And Operating Instructions page 10

Technical data
General specifications
Displays Read-off angle
Displays
Configuration
Power supply
Power consumption
Temperature range
Degree of
protection
Overvoltage category
Degree of contamination
Conformance to European standards
Electrical Functional earthing
connection
Power voltage and
process signals
Total delay time 3)
Resolution
Dimensions
Weight
1)
The input board 4 (thermocouple at input 1) is no longer available
2)
Specific measuring ranges on request
3)
Depending on how many functions are configured
10
Readable from all sides, high-contrast and lighted
Liquid Crystal Display (LCD)
1
⁄
3 -digit set point (reference variable) display and
2
1
⁄
3 -digit controlled variable display; bar graph displays
2
for deviation (i.e. error) and output variable; LED displays
for range exceeding, alarm messages when limits are
exceeded, manual operation, faults etc.;
parameter display (only in the PARAMETER level)
Permanently stored function blocks for fixed set point
control, follow-up control with or without internal/external
set point change-over, cascade control, synchro control,
ratio control, SPC control, limiting control, DDC backup
fixed set point control via binary contact
230 V AC (200 to 250 V AC),
120 V AC (102 to 132 V AC),
24 V AC (21.5 to 26.5 V AC),
Option 24 V DC (19 to 34 V DC);
48 to 62 Hz
Approx. 18 VA
0 to 50 °C (operation),
−20 to 70 °C (shipping and storage)
Panel-mounting unit:
Rack-mounting unit:
II
2
EN 61010, edition March 1994
Panel-mounting unit:
Rack-mounting unit:
(DIN 41 612), Cu-flex. lead > 2.5 mm
Panel-mounting unit: Screw terminals 1.5 mm
Rack-mounting unit: Two connectors, Type F
(DIN 41 612), soldering or crimp types
Approx. 100 ms
Input and output, approximately 11 bits
See Fig. 3 and Fig. 4
Panel-mounting unit, approx. 1.9 kg; rack-mounting unit, 1 kg
Front IP 54, case IP 30,
terminals IP 00;
IP 00
On case w. Cu-flex. lead > 2.5 mm
Connector, Type F
2 ;
Description
2
2