Pa Level (Code Number For The Parameter Level); Co Level (Code Number For The Configuration Level) - Samson Trovis 6400 Mounting And Operating Instructions

PA level (code number for the PARAMETER level)
6.10. PA level (code number for the PARAMETER level)
This level can be used to define the code number for the PARAMETER level. The level is only
accessible, however, when the process control station operates in the code number mode (see
section 4.3., p. 19) and the operator knows the code number for servicing. In order to prevent
this code number for servicing from being accessed by unauthorized persons, either cut out or
scribble over the number on page 97.
To modify the code number for the PARAMETER level, take the following steps:
The process control station is in the OPERATING level.
1. Press A key. I-O appears on the display.
2. Press C or D key until PA and
3. Press A key.
4. Enter the code number for servicing in the upper line of the display, using the C or D key.
5. Press A key. The currently valid code number is displayed and PA flashes.
6. Enter the new code number with the C or D key.
7. Press A key. PA no longer flashes.
8. Press F key to exit this level.
6.11. CO level (code number for the CONFIGURATION level)
This level can be used to define the code number for the CONFIGURATION level. The level is
only accessible, however, when the process control station is in the code number mode (see
section 4.3., S. 19) and the operator knows the code number for servicing. In order to prevent
this code number for servicing from being accessed by unauthorized persons, either cut out or
scribble over the number on page 97.
To modify the code number for the CONFIGURATION level, take the following steps:
The process control station is in the OPERATING level.
1. Press A key. I-O appears on the display.
2. Press C or D key until CO and
3. Press A key.
4. Enter the code number for servicing in the upper line of the display, using the C or D key.
5. Press A key. The currently valid code number is displayed and CO flashes.
6. Enter the new code number with the C or D key.
7. Press A key. CO no longer flashes.
8. Press F key to exit this level.
44
are displayed.
flashes on the display. "1" comes up in the upper line of the display.
are displayed.
flashes on the display. "1" comes up in the upper line of the display.
Operation