Table of Contents
Advertisement
Next steps
1
Install the PCIe card.
2
Complete the procedure listed in After working inside your system.
3
While booting, press F2 to start the System Setup and ensure the battery is operating properly.
4
Enter the correct time and date in the System Setup Time and Date fields.
5
Exit the System Setup.
Installing system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. See your safety information for additional details.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
Battery is a Field Replaceable Unit (FRU). Only Dell certified service technicians must remove or install system battery.
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
3
Remove the PCIe card.
Steps
1
To install a new server battery, hold the battery with the positive facing up and slide it under the securing tabs.
2
Press the battery into the connector until it snaps into place.
76
Installing and removing server components
Advertisement
Table of Contents
