Table of Contents
Advertisement
Next steps
1
Install a 2.5-inch HDD into a rear bay.
2
Complete the procedure listed in After working inside your system.
Installing 2.5-inch hard drive into the rear bay
Prerequisites
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Align the HDD with the HDD carrier. Make sure the connectors are facing the front. Make sure the connectors are positioned as
demonstrated in the following illustration.
2
Secure the HDD with the provided screws.
Installing and removing server components
87
Advertisement
Table of Contents
