Next steps
1
Install the HDD backplane.
2
Complete the procedure listed in After working inside your system.
Installing HDD backplane
Prerequisites
NOTE:
The procedure is available only for DSS 9620 server with 2.5-inch hot swappable HDDs.
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
3
Remove the 3.5-inch or 2.5-inch hot swappable HDDs.
Steps
1
Align the HDD backplane to the HDD cage in the chassis.
2
Install the HDD backplane.
3
Secure the HDD backplane with the provided screw.
4
Connect the power cabling and miniSAS cable to the HDD backplane.
280
Installing and removing server components