Table of Contents
Advertisement
Next steps
1
Install the Mini PERC battery.
2
Complete the procedure listed in After working inside your system.
Installing Mini PERC battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your
system.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Slide the Mini PERC battery into the slot on the air shroud. Make sure the cable is routed through the top of the air shroud.
•
Do not use the cables on the PERC battery to pull the PERC battery in place to prevent fraying the cables.
2
Continue to slide the PERC battery into the air shroud until it is fully flush in place.
Installing and removing server components
119
Advertisement
Table of Contents
