10
Align the PCIe M.2 assembly with the screw posts on the chassis and the connector on the server board.
11
Press the PCIe M.2 assembly into the server board connector until it is fully seated.
12
Secure the PCIe M.2 assembly with provided screws.
Figure 81. Installing the PCIe M.2 assembly
Table 56. Assembly material
Description
#6-32 screw
Next step
1
Complete the procedure listed in After working inside your system.
Removing x8 SATA M.2 card
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Remove the securing screws from the SATA M.2 assembly.
2
Remove the SATA M.2 assembly from the chassis.
Quantity
3
Torque (lbs/inch)
6 ± 0.2
Installing and removing server components
159