System Setup Details; System Bios - Dell EMC DSS 9620 Installation And Service Manual

System Setup details

The System Setup Main Menu screen details are explained as follows:
Option Description

System BIOS

Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI (Unified
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see Integrated Dell Remote Access Controller User's Guide at
Dell.com/poweredgemanuals.
Device Settings Enables you to configure device settings.
Service Tag Enables you to configure service tag settings.
Settings
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, set the RAID mode,
and enable or disable USB ports.
Viewing System BIOS
About this task
To view the System BIOS screen, perform the following steps:
Steps
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
Table 23. System BIOS Settings
Option
System Information
Memory Settings
26 Pre-operating system management applications
Description
Specifies information about the system such as the system model name, BIOS version, and
Service Tag.
Specifies information and options related to the installed memory.