Table of Contents
Advertisement
Figure 142. Connecting the cables
Next steps
1
Follow the procedure listed in the After working inside your system.
2
Install any device drivers needed for the card as described in the documentation for the card.
NPDB
Removing NPDB
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Disconnect all cables from the NPDB.
2
Remove the securing screw from the NPDB.
3
Lift the NPDB to remove from the chassis.
264
Installing and removing server components
Advertisement
Table of Contents
