Table of Contents
Advertisement
Table 65. Assembly material
Description
#6-32 screw
Next steps
1
Follow the procedure listed in the After working inside your system.
2
Install any device drivers needed for the card as described in the documentation for the card.
OCP card
Removing OCP card from slot 1
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Remove the securing screws from the OCP card assembly.
2
Remove the OCP card assembly from the chassis.
NOTE:
You must install an expansion card filler cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
208
Installing and removing server components
Quantity
2
Torque (lbs/inch)
6 ± 0.2
Advertisement
Table of Contents
