Front-Panel Features; Diagnostic Indicators; Nic Indicator Codes - Dell EMC DSS 9620 Installation And Service Manual

Table of Contents

Advertisement

Front-panel features

Figure 4. Front-panel features
Table 4. Front-panel features
No.
Item
1
Expansion port, slot 1
2
Expansion port, slot 4
3
2.5-inch HDD
4
Power button
5
LAN port
6
DisplayPort
7
Service tag
8
iDRAC Direct micro USB port
9
Expansion port, slot 3
10
USB port

Diagnostic indicators

NIC indicator codes

Each NIC on the back panel has an indicator that provides information about the network activity and link status. The activity LED indicates
whether data is flowing through NIC or not. The link LED indicates the speed of the connected network.
Table 5. NIC indicators
Convention
Status
A
Link and activity indicators are off
B
Link indicator is green and activity
indicator is blinking green
10
Overview
Description
Supports x8 mezzanine expansion cards. Connected to CPU 1.
Supports x16 PCIe cards. Connected to CPU 1.
Two 2.5-inch hot swappable HDDs.
Press the power button to turn the server on or off. The indicator on the
button indicates if the system is on or off.
Single 10/100/1000 Mbps RJ-45 connector shared between 1G LAN and
iDRAC management LAN.
Single mini DisplayPort connector.
Location of information tag specifying the system Service Tag.
The iDRAC Direct micro USB port enables you to connect a portable device
to the server.
Supports OCP expansion cards. Connected to CPU 1.
Two USB 3.0 compliant ports.
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum port speed and data
is being sent or received.

Advertisement

Table of Contents
loading

Table of Contents