Installing Expansion Card Into Slot 6; System Battery; Removing System Battery - Dell EMC DSS 9620 Installation And Service Manual

Table of Contents

Advertisement

Installing expansion card into slot 6

CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.

System battery

The system battery is used for system functions like powering the real-time clock and storing the computer's BIOS settings.

Removing system battery

Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. See your safety information for additional details.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
Battery is a Field Replaceable Unit (FRU). Only Dell certified service technicians must remove or install system battery.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
3
Remove the PCIe card.
Steps
1
Locate the battery socket, see Jumpers and connectors.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing or removing a
battery.
2
To eject the battery, press firmly on the edge of the positive side of the battery in the direction of the arrow as shown in the figure.
74
Installing and removing server components

Advertisement

Table of Contents
loading

Table of Contents