Table of Contents
Advertisement
Table 25. Network Settings
Option
PXE Device n (n = 1 to 4)
PXE Device n Settings (n = 1 to 4)
UEFI HTTP Device n Settings (n = 1 to 3)
UEFI iSCSI Settings
You can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option is available only in the UEFI boot mode.
BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controller
handles the network settings.
Viewing UEFI iSCSI Settings
About this task
To view the UEFI iSCSI Settings screen, perform the following steps:
Steps
1
Turn on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3
On the System Setup Main Menu screen, click System BIOS.
4
On the System BIOS screen, click Network Settings.
5
On the Network Settings screen, click UEFI iSCSI Settings.
UEFI iSCSI Settings details
The UEFI iSCSI Settings screen details are explained as follows:
Table 26. UEFI iSCSI Settings
Option
ISCSI Initiator Name
ISCSI Device n (n = 1 to 4)ISCSI Device1
System Security
You can use the System Security screen to perform specific functions such as setting the system password, setup password and disabling
the power button.
30
Pre-operating system management applications
Description
Enables or disables the device. When enabled, a UEFI boot option is created for the device.
Enables you to control the configuration of the PXE device.
Enables or disables the UEFI HTTP device settings.
Description
Specifies the name of the iSCSI initiator (iqn format).
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the
iSCSI device automatically.
Advertisement
Table of Contents
