Table of Contents
Advertisement
8
Remove the securing standoff screw from the transfer board.
9
Slide the transfer board to release it from the securing pin on the OCP bracket and remove it.
Figure 111. Removing the transfer board
Next steps
1
Install the OCP card into slot 1.
2
Complete the procedure listed in After working inside your system.
Installing OCP card into slot 1
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Align the slits on the transfer board with the securing pins on the OCP bracket.
2
Slide the transfer board into the pins until the securing holes on the transfer board and OCP bracket align.
3
Secure the transfer board with a standoff screw.
214
Installing and removing server components
Advertisement
Table of Contents
