Table of Contents
Advertisement
Figure 42. Removing server board securing screws
4
Grasp the back of the server board and tilt upward. Do not lift the back of the server board completely to prevent damage to the
components and I/O ports on the front.
CAUTION:
Do not lift the server board by holding a memory module slot, any other connector, or component.
5
Pull the server board back to release the I/O ports from the chassis, and lift the server board out to remove.
6
Place the server board in an antistatic bag.
Figure 43. Removing the server board
110
Installing and removing server components
Advertisement
Table of Contents
