Table of Contents
Advertisement
Figure 69. Removing the bezel and riser board
Next steps
1
Install the Mini PERC.
2
Complete the procedure listed in After working inside your system.
Installing Mini PERC
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Align the holes on riser board with the holes on mezzanine brackets.
2
Secure the mezzanine brackets with screws.
3
Align the bezel with the mezzanine bracket and install.
146
Installing and removing server components
Advertisement
Table of Contents
