Table of Contents
Advertisement
Table 51. Assembly material
Description
#6-32 screw
Next step
1
Complete the procedure listed in After working inside your system.
Removing Mini PERC
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Remove the securing screws from the Mini PERC assembly.
2
Remove the Mini PERC assembly from the chassis.
NOTE:
You must install an expansion card filler cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Figure 66. Removing the Mini PERC assembly
3
Remove the bridge board from the Mini PERC assembly.
144
Installing and removing server components
Quantity
3
Torque (lbs/inch)
6 ± 0.2
Advertisement
Table of Contents
