Display Bgp Routing-Table Peer - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
longer-match: Matches the longest prefix.
Description
Use the display bgp routing-table flap-info command to display BGP route flap
statistics. If no parameter is specified, this command displays all BGP route flap
statistics.
Examples
# Display BGP route flap statistics.
<Sysname> display bgp routing-table flap-info
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Network
*> 55.0.0.0
*d 77.0.0.0
Table 1-9 Description on the fields of the display bgp routing flap-info command
From
Flaps
Duration
Reuse
Refer to

1.1.30 display bgp routing-table peer

Syntax
display bgp routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ]
View
Any view
Default Level
1: Monitor level
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
From
12.1.1.1
12.1.1.1
Field
Table 1-6 for description on the other fields above.
Chapter 1 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
Flaps Duration
2 00:00:16
5 00:34:02
Source IP address of the route
Number of routing flaps
Duration time of the flap route
Reuse time of the flap route
1-32
Reuse Path/Origin
100?
00:27:08 100?
Description