Display Bgp Group - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
None
Description
Use the default-route imported command to allow default route redistribution into the
BGP routing table.
Use the undo default-route imported command to disallow the redistribution.
By default, default route redistribution is not allowed.
Using the default-route imported command cannot redistribute default routes. To do
so, use the import-route command.
Related commands: import-route.
Examples
# In BGP view, allow default route redistribution from OSPF into BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] default-route imported
[Sysname-bgp] import-route ospf 1
# In BGP-VPN instance view, enable redistributing default route from OSPF into BGP
(the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] default-route imported
[Sysname-bgp-vpn1] import-route ospf 1

1.1.17 display bgp group

Syntax
display bgp group [ group-name ]
View
Any view
Chapter 1 BGP Configuration Commands
1-17