H3C S9500 Series Command Manual page 27

Command Manual – BGP
H3C S9500 Series Routing Switches
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp routing-table command to display specified BGP routing
information in the BGP routing table.
Examples
# Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
Network
*> 40.40.40.0/24
Table 1-6 Description on the fields of the display bgp routing command
Field
Total Number
of Routes
BGP Local
router ID
Status codes
Origin
Network
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
20.20.20.1
Total Number of Routes
BGP Local router ID
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by other means)
Destination network address
1-24
Chapter 1 BGP Configuration Commands
MED LocPrf
Description
PrefVal Path/Ogn
0 200 300i