Peer Connect-Interface (Bgp/Bgp-Vpn Instance View) - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Default Level
2: System level
Parameters
group-name: Name of a peer group.
ip-address: IP address of a peer.
Description
Use the peer capability-advertise route-refresh command to enable the BGP route
refresh capability.
Use the undo peer capability-advertise route-refresh command to disable the
capability.
The capability is enabled by default.
Examples
# In BGP view, enable BGP route refresh for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise route-refresh
# In BGP-VPN instance view, enable BGP route refresh for peer 160.89.2.33 (The VPN
has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 160.89.2.33 as-number 100
[Sysname-bgp-vpn1] peer 160.89.2.33 capability-advertise route-refresh

1.1.47 peer connect-interface (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } connect-interface interface-type interface-number
undo peer { group-name | ip-address } connect-interface
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Chapter 1 BGP Configuration Commands
1-48