Display Bgp Routing-Table Regular-Expression - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Parameters
ip-address: IP address of a peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length.
statistic: Displays route statistics.
Description
Use the display bgp routing-table peer command to display BGP routing information
advertised to or received from the specified BGP peer.
Related commands: display bgp peer.
Examples
# Display BGP routing information advertised to BGP peer 20.20.20.1.
<Sysname> display bgp routing table peer 20.20.20.1 advertised-routes
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
Network
*> 30.30.30.0/24
*> 40.40.40.0/24
Refer to

1.1.31 display bgp routing-table regular-expression

Syntax
display bgp routing-table regular-expression as-regular-expression
View
Any view
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
0.0.0.0
0.0.0.0
Table 1-6 for description on the fields above.
Chapter 1 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
MED
0
0
1-33
LocPrf PrefVal Path/Ogn
0
0
i
i