Reset Bgp Ipv4 All - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Default Level
1: Monitor level
Parameters
as-path-regexp: Clears the flap statistics of routes matching the AS path regular
expression.
as-path-acl-number: Clears the flap statistics of routes matching an AS path ACL,
number of which is in the range 1 to 256.
ip-address: Clears the flap statistics of a route.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length.
Description
Use the reset bgp flap-info command to clear the flap statistics of routes matching the
specified filter.
The flap statistics of all the routes will be cleared if no parameter is specified.
Examples
# Clear the flap statistics of all routes matching AS path ACL 10.
<Sysname> reset bgp flap-info as-path-acl 10

1.1.76 reset bgp ipv4 all

Syntax
reset bgp ipv4 all
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the reset bgp ipv4 all command to reset all the BGP connections of IPv4 unicast
address family.
Chapter 1 BGP Configuration Commands
1-75