H3C S9500 Series Command Manual page 25

Command Manual – BGP
H3C S9500 Series Routing Switches
Examples
# Display the detailed information of the peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 verbose
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 1-5 Description on the fields of the display bgp peer command
Peer
Local
Type
BGP version
remote router ID
BGP current state
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1029
Configured: Active Hold Time: 180 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Field
Chapter 1 BGP Configuration Commands
Remote - 179
IP address of the peer
Local router ID
Peer type: Internal as IBGP peers and
External as EBGP peers.
BGP protocol version
Router ID of the peer
Current state of the peer
1-22
Keepalive Time: 60 sec
Description