Peer Ebgp-Max-Hop (Bgp/Bgp-Vpn Instance View) - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Default Level
2: System level
Parameters
group-name: Name of a peer group.
ip-address: IP address of a peer.
description-text: Description information for the peer/peer group.
Description
Use the peer description command to configure the description information for a
peer/peer group.
Use the undo peer description command to remove the description information of a
peer/peer group.
By default, no description information is configured for a peer/peer group.
Create a peer/peer group before configuring a description for it.
Related commands: display bgp peer.
Examples
# In BGP view, configure the description information of the peer group test as ISP1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test description ISP1
# In BGP-VPN instance view, configure the description information of the peer group
test as ISP1 (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test description ISP1

1.1.50 peer ebgp-max-hop (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } ebgp-max-hop [ hop-count ]
undo peer { group-name | ip-address } ebgp-max-hop
View
BGP view, BGP-VPN instance view
Chapter 1 BGP Configuration Commands
1-51