Compare-Different-As-Med (Bgp/Bgp-Vpn Instance View) - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
View
System view
Default Level
2: System level
Parameters
as-number: Local AS number.
Description
Use the bgp command to enable BGP and enter the BGP view.
Use the undo bgp command to disable BGP.
By default, BGP is not enabled.
Examples
# Enable BGP and set local AS number to 100.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]

1.1.7 compare-different-as-med (BGP/BGP-VPN instance view)

Syntax
compare-different-as-med
undo compare-different-as-med
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
None
Description
Use the compare-different-as-med command to enable the comparison of the MED
for paths from peers in different ASs.
Use the undo compare-different-as-med command to disable the comparison.
The comparison is disabled by default.
Chapter 1 BGP Configuration Commands
1-7