Display Bgp Routing-Table Flap-Info - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Parameters
None
Description
Use the display bgp routing-table different-origin-as command to display BGP
routes originating from different autonomous systems.
Examples
# Display BGP routes originating from different ASs.
<Sysname> display bgp routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Network
*> 55.0.0.0
*
Refer to

1.1.29 display bgp routing-table flap-info

Syntax
display bgp routing-table flap-info [ regular-expression as-regular-expression |
as-path-acl
[ longer-match ] ] ]
View
Any view
Default Level
1: Monitor level
Parameters
as-regular-expression: Displays route flap information that matches the AS path regular
expression.
as-path-acl-number: Displays route flap information matching the AS path ACL.
ip-address: Destination IP address.
mask: Mask, in dotted decimal notation.
mask-length: Mask length.
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
12.1.1.1
14.1.1.2
Table 1-6 for description on the fields above.
as-path-acl-number
Chapter 1 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
MED
0
0
| ip-address [
1-31
LocPrf PrefVal Path/Ogn
0 100?
0 300?
{ mask | mask-length }