H3C S9500 Series Command Manual page 21

Command Manual – BGP
H3C S9500 Series Routing Switches
Default Level
1: Monitor level
Parameters
group-name: Peer group name.
Description
Use the display bgp group command to display the information of the peer group.
Examples
# Display the information of the peer group aaa.
<Sysname> display bgp group aaa
BGP peer-group is aaa
remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 1-2 Description on the fields of the display bgp group command
BGP peer-group
remote AS
type
Maximum allowed
prefix number
Threshold
hold timer value
Keepalive timer value
Minimum time between
advertisement runs
V AS MsgRcvd
4 200
Field
Name of the BGP peer group
AS number of peer group
Type of the BGP peer group: IBGP or EBGP
Maximum allowed prefix number
Threshold value
Holdtime interval
Keepalive interval
Minimum time between advertisement runs
Chapter 1 BGP Configuration Commands
MsgSent OutQ PrefRcv Up/Down
0 0 0
Description
1-18
State
0 00:00:35 Active