Reset Bgp Dampening; Reset Bgp Flap-Info - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Description
Use the reset bgp command to reset specified BGP connections.
Examples
# Reset all the BGP connections.
<Sysname> reset bgp all

1.1.74 reset bgp dampening

Syntax
reset bgp dampening [ ip-address [ mask | mask-length ] ]
View
User view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address of a route.
mask: Mask, in dotted decimal notation.
mask-length: Mask length.
Description
Use the reset bgp dampening command to clear route dampening information and
release suppressed routes.
Related commands: dampening, display bgp routing-table dampened.
Examples
# Clear damping information of route 20.1.0.0/16 and release suppressed route.
<Sysname> reset bgp dampening 20.1.0.0 255.255.0.0

1.1.75 reset bgp flap-info

Syntax
reset bgp flap-info [ regexp as-path-regexp | as-path-acl as-path-acl-number |
ip-address [ mask | mask-length ] ]
View
User view
Chapter 1 BGP Configuration Commands
1-74