Display Bgp Routing-Table Different-Origin-As - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Default Level
1: Monitor level
Parameters
None
Description
Use the display bgp routing-table dampening parameter command to display BGP
route dampening parameters.
Related commands: dampening.
Examples
# Display BGP route dampening parameters.
<Sysname> display bgp routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value
Reuse Value
HalfLife Time(in
Suppress-Limit
Table 1-8 Description on the fields of the display bgp routing-table dampening
parameter command
Maximum Suppress Time
Ceiling Value
Reuse Value
HalfLife Time
Suppress-Limit

1.1.28 display bgp routing-table different-origin-as

Syntax
display bgp routing-table different-origin-as
View
Any view
Default Level
1: Monitor level
: 16000
: 750
second) : 900
: 2000
Field
1-30
Chapter 1 BGP Configuration Commands
Description
Maximum Suppress Time
Upper limit of penalty value
Limit for a route to be desuppressed
Half-life time of active routes
Limit for a route to be suppressed