Display Bgp Routing-Table Community - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches

1.1.24 display bgp routing-table community

Syntax
display bgp routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ]* [ whole-match ]
View
Any view
Default Level
1: Monitor level
Parameters
aa:nn: Community number.
&<1-13>: Argument before it can be entered up to 13 times.
no-advertise: Displays BGP routes that are not advertised to any peer.
no-export: Displays routes that are not advertised out the AS. If a confederation is
configured, it displays routes that are not advertised out the confederation, but can be
advertised to other sub ASs in the confederation.
no-export-subconfed: Displays routes that are neither advertised out the AS nor to
other sub ASs in a configured confederation.
whole-match: Displays the exactly matched routes.
Description
Use the display bgp routing community command to display BGP routing
information with the specified BGP community.
Examples
# Display routing information with the specified BGP community.
<Sysname> display bgp routing-table community 11:22
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
Network
*> 10.10.10.0/24
*> 40.40.40.0/24
Refer to
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
0.0.0.0
20.20.20.1
Table 1-6 for description on the fields above.
Chapter 1 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
MED
0
1-27
LocPrf PrefVal Path/Ogn
0 i
0 200 300i