Confederation Peer-As - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Related commands: confederation id, confederation peer-as.
Examples
# AS100 contains devices not compliant with RFC3065 and comprises two sub-ASs,
64000 and 65000.
<Sysname> system-view
[Sysname] bgp 64000
[Sysname-bgp] confederation id 100
[Sysname-bgp] confederation peer-as 65000
[Sysname-bgp] confederation nonstandard

1.1.10 confederation peer-as

Syntax
confederation peer-as as-number-list
undo confederation peer-as [ as-number-list ]
View
BGP view
Default Level
2: System level
Parameters
as-number-list: Sub-AS number list. Up to 32 sub-ASs can be configured in one
command line. The expression is as-number-list = as-number &<1-32>, in which
as-number specifies a sub-AS number, and &<1-32> indicates up to 32 numbers can
be specified.
Description
Use the confederation peer-as command to specify confederation peer sub-ASs.
Use the undo confederation peer-as command to remove specified confederation
peer sub-ASs.
By default, no confederation peer sub-ASs are configured.
Before this configuration, the confederation id command must be used to specify the
confederation for the sub-ASs.
If the undo confederation peer-as command without the as-number-list argument is
used, all confederation peer sub-ASs are removed.
Related commands: confederation nonstandard, confederation id.
Chapter 1 BGP Configuration Commands
1-10